Nema17 Stepper Motor 2 Phase 1.8 Degrees 1.33A 3D Printer Hybrid Driver Motor
The NEMA17 has a moderate size and is suitable for installation in devices with limited space, while also providing high power output.
Printers, engraving machines, 3D printers, and robots.
Features:
-
Our engineers will contact you within two days to offer the most effective solution
-
Customized service offerings
-
Available in single or double shaft versions
-
Wanted dealers! !
-
We actively pursue dealers!
Motor Specifications
Step Angel | 1.8 ° |
Fram Size | 42 mm |
Number of Phase | 2 Phase |
Rated Current | 1.33 A |
Holding Torque | 320 mN.m |
Resistance | 2.7 ohm |
Inductance | 4.2 mH |
Rotor Inertia | 38 g-cm² |
Motor weight | 0.2 kg |
Number of leads | 4 |
Connection | Bipolar |
Appearance
Dimensions
Operating Specifications
Step Angle: 1.8°
Maximum Temperature :80°C maximum
Ambient Temperature: -20 °C to 50°C
Storage Temperature -20: °C to 100°C
Humidity Range (%) :85% or less, non-condensing
Magnet Wire Insulation :Class B 130 deg C
Insulation Resistance :100M Ohm at 500 VDC
Dielectric Strength :500 VDC for 1 min
Torque Curves
Submodels
| Model | Holding Torque | Step Angle | Motor Length | Type of Shaft | Rated Current |
| 42SHD4950 | 0.13N.m | 1.8° | 20mm | D Shaft-20mm | 1.0A |
| 42SHD4003 | 0.26N.m | 1.8° | 34mm | D Shaft-20mm | 0.4A |
| 42SHD0261 | 0.45N.m | 1.8° | 40mm | D Shaft-20mm | 1.68A |
| 42SHD4425 | 0.59N.m | 1.8° | 48mm | D Shaft-24mm | 2.0A |
| 42SHD4813 | 0.8N.m | 1.8° | 60mm | D Shaft-24mm | 2.1A |
Download
If our standard motor cannot meet your needs,
we can customize the motor according to your needs
Customized content includes but is not limited to special shafts, winding parameters, installation dimensions, lead wires with special requirements, connectors, etc.
Options:
Encoder | Brake | Gearbox | Shaft |
 |  |  |  |
Please click the "Get a quote" button below to tell us your requirements.
Product Tags:
|
|
Nema 17 Hybrid Driver Motor 2 Phase 1.8 Degrees 1.33A For 3D Printer Images
|
